Geoffrey Mitchell is Professor and Coordinator Researcher at the Centre for Rapid and Sustainable Product Development at the Polytechnic of Leiria in Portugal. He is Adjunct Professor at the Sri Jayachamarajendra College of Engineering, Department of Polymer Science and Engineering in Mysore India and Visiting Medical Physicist Oxford University Hospitals NHS Foundation Trust, Oxford UK. Geoffrey Mitchell carried out his doctoral work at the University of Cambridge in the UK and subsequently held a post-doctoral fellowship at Cambridge and a JSPS Fellowship at Hokkaido University in Japan. Prior to his current position he was Professor of Polymer Physics at the University of Reading, UK and from 2005, the founding Director of the Centre for Advanced Microscopy at Reading. His research work bridges physics, biology, chemistry and technology and he is passionate about the opportunities afforded by Additive Manufacturing. He has pioneered the use of in-situ x-ray and neutron scattering in the study of polymer processing and has most recently extended this concept to injection moulding. He has published over 400 scientific books and papers. He is a Fellow of both the Institute of Physics and the Royal Society of Chemistry as well as the Royal Society for the Encouragement of Arts, Manufactures and Commerce and a Member of the Institute for Physics and Engineering of Medicine

Ed Macnab is Chief Executive Officer and one of the core group of founders of 3DPHC – 3D Printed Homes Corporation in Calgary, Canada. 3DPHC is a socially conscious start-up that truly places people ahead of profits. He has had a long career spanning the construction industry, the Canadian oilfield, telecom design and manufacture, finally retiring as an International IT Project Manager. Our VISION is to see every family living in a home that is affordable and meets their needs. Our MISSION is to reduce the cost of housing by using advanced technology and materials.

Pekka Ketola has completed his PhD (2002) from the Department of Human-Technology Interaction, University of Tampere, Finland. He has been working at Nokia corporation in various user experience and innovation management roles during 17 years. Since 2012 Pekka has been building innovation, light electric mobility and 3D printing industries as entrepreneur, founder and innovator. He is frequent speaker for innovation and industrial 3D printing related topics. Pekka’s favorite question is ”What would Leonardo da Vinci do?”

Thorsten Pretsch has received his doctorate in Chemistry from the Free University of Berlin in 2004 and has been conducting research for more than 15 years in the field of shape memory polymers. Currently, he is responsible at Fraunhofer Institute for Applied Polymer Research IAP for the division Synthesis and Polymer Technology and the working group Shape Memory Polymers. Since 2019 he is also deputy scientific coordinator at Fraunhofer Cluster of Excellence Programmable Materials CPM. Thorsten Pretsch has published 33 research articles in SCI(E) journals and is involved as inventor in more than 25 patent applications.

Prajwal Agrawal is currently a Research Associate at ETH Zurich, Switzerland working with Dr. Daniel Ahmed on developing cutting-edge fabrication technologies for acoustics robotics, (bio)fabrication, and precision medicine. Previously he worked as a research assistant in Dr. Shrike Zhang’s group at Harvard Medical School and Brigham's and women's hospital, USA working towards fabricating and developing novel techniques for bioprinting and tissue engineering especially for orthapedic, coloidal photonic crystals, and other applications. He has been awarded G.D. Naidu Young Scientist Award, Achievers award, and C.V. Raman Award by VIT for his outstanding academic and co-curricular performance. Moreover, he has been awarded third place for the best poster award at MaP Graduate symposium, 2022. Besides academics, he has collaborated with companies such as Bosch, Mahindra Rise, Natural's Sugar LTD, and others. Among his publications are 10+ papers in high-impact peer-reviewed journals, such as Small Structures, Applied Physics Reviews, Materials Today, Nature Communications, Advanced NanoBiomed Research, and others. He has also written two book chapters. In addition, he has written 2 editorials and 4+ conference papers. Furthermore, he serves as a reviewer for several journals published by Springer Nature and Elsevier.

Ingi Karlsson is the owner and CEO of Spot-Nordic, Iceland. Ingi worked as a litho Printer and prepress worker for close to 20 years before entering into sales along with R&D that began in 2003 and lead to the launch of the Spot Matching System in December 2018. Ingi was the first Ugra Certified Expert (PSO) in 2007. Ingi represents the Icelandic Standards Organization in the TC130 group of ISO and has written several articles on colour and colour consistency.

Soshu Kirihara is a doctor of engineering and a professor of Joining and Welding Research Institute (JWRI), Osaka University, Japan. In his main investigation “Materials Tectonics as Sustainable Geoengineering” for environmental modifications and resource circulations, multi-dimensional structures were successfully fabricated to modulate energy and materials flows effectively. Ceramic and metal components were fabricated directly by smart additive manufacturing, design and evaluation (Smart MADE) using high power ultraviolet laser lithography. Original stereolithography systems were developed, and new start-up company “SK-Fine” was established through academic-industrial collaboration.

In recent years, Rudolf von Stokar has successfully accompanied numerous companies through the critical start-up phase and market launch in German industry. Particular focus here has been on: Software-over-the-air, driver assistance systems, alternative drives, Car2X, navigation up to autonomous driving. Rudolf Stokar has an international and technically sound education. He lives in Munich as a single father with his two daughters.

I, Jayshree Ramsook - Khiali - One of the Director of HEALTH SPOT LIFE THERAPY collaborated with Mr. Sipho Thomas Magwasa who is currently licensed to establish a PRIVATE HOSPITAL TO INTRODUCE STEM CELL TREATMENTS IN HIS HOSPITAL. Started as a volunteer paramedic and thereafter had three and a half years of experience as a paramedic at the South African Provincial Ambulance Services, based at the R.K. KHAN PROVINCIAL HOSPITAL. Due to challenging rescue times, my work prompted me to pursue in stem cell research at length. Constantly following the news in America, the ban on embryonic stem cell research. However my research started on 17 October 2005 were I had the opportunity to communicate with Dr. Direndra Rajaruthnum a cardiac thoracic surgeon about my extensive research on stem cell infusions, however I was inspired by his moral support to pursue stem cell treatments. An opportunity to wok with medical academics and fund raise for the following patients : My case 1. Rose Lee Usher, a leukemia patient urgently required Umbilical Cord Blood Stem Cell to save her life, due to not receiving a match in South Africa the Umbilical Cord Blood was flown from Boston , America and now she recovered and well. Another case- 2. Mrs.Rosheen Mahabeer diagnosed with Sarcoidosis of the lung since 17 October 2016 . She had to live with an oxygen tank 24 hours a day , urgently required stem cell infusion, however she received stem cell infusion at a private clinic, thereafter lived for four years. Therefore I had taken the initiative to apply for a Provincial Lottery - a Society Lottery to assist in fundraising for cancer treatment. Participated for the draft promulgation of THE SOCIETY LOTTERIES ACT 57 OF 1997. Had been employed as a ward administrator for ward 68 for the African National Congress. A meeting was held at the South African Premiers Office in Kwa- Zulu Natal dated 09 November 2011, where I was instructed by the Premier Dr, Laurence Zweli Mkhize, to introduce stem cell treatments for burns. Thereafter my projects were referred to the South African National SOUTH AFRICAN HEALTH DEPARTMENT, since 10 March 2014. Had an opportunity to meet Sir, Richard Branson where I was enlighten about stem cell infusion at length. I submitted projects proposals such as, Dendritic Cell & Natural Killer Cell Immunotherapy For cancer patients and other stem cell related treatments including 3D Bio - Printing. I have addressed these major concepts with HIGHNESS SHEIK HAMDANAND VARIOUS OTHER GOVERNMENT DEPARTMENTS IN THE UNITED ARAB EMIRATES.

Entered Bauman Moscow State Technical University in 2016, department of rocket-space composite structures. In 2020 graduated with bachelor's degree, in the same year entered in mastership to the same department. Graduated with a master's degree in 2022. Since 2020 working in the Anisoprint SARL as an application engineer, 3d printing company that develops desktop and industrial 3D printers for printing strong and lightweight parts of composite materials using patented CFC technology. For the past three years, has been involved in static analysis of composite structures and the development of topologically optimized structures for 3D printing with continuous fiber.

Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, incuding the L’ORÉAL-UNESCO Italy for Women and Science 2011

Noah Mostow received his master’s of science from the Colorado School of Mines in 2020. He has since been a principal author for Wohlers Report 2021 and 2022, in addition to writing articles for Manufacturing Engineering and Metal AM Magazine. Mostow provides a different perspective to the AM industry with his background in mechanical engineering, biomedical engineering, market research, and data analytics.

Aside from her mango lassi addiction and spontaneous jigsaw puzzle-making, Fatimah loves enduring entrepreneurial adventures. She's the founder and inventor of Unicorn Lock, a CAD and 3D printing-based business, BluWings Technologies LLC, an app development startup, and 2 Min Maths!, a Youtube platform dedicated to helping others enjoy math as much as she does. From winning The Gold Presidential Service Award from Biden to hosting summer iOS development boot camps, she's dedicated to serving her community with her greatest abilities. She's an outspoken person and loves speaking about women's empowerment in STEM, having a strong mentality, and 3D printing and designing. She's a 2x TEDx speaker and excited for more adventures ahead. Since winning 1st place in USA's largest bioengineering competition, she's learned that age doesn't determine success, hard work and perseverance do.

Ty Canion is the founder and CEO of Canion3D Inc. a technology company focused on the Additive Manufacturing industry, which he founded in 2015. He is a 15 year veteran of the U.S. Air Force and has worked in various domains of technology across several industries. He has completed his Master’s Degree in Business Administration with concentration of Information Systems from the University of Arizona GC and his bachelors in Entrepreneurship Studies also from UAGC.

Rashed Alsihamat from Jordan holds a Bachelor’s degree in Electrical Engineering, Power and Control from Mutah University / Al-Karak, Jordan, and completed two research projects- Social manufacturing solutions under the title HKCMB and green crystal cells, and the world is still working on implementing the two projects, one of which is in the beginning of establishment in partnership with the Entrepreneurship Center at Mutah University, and the other is under development and study, and there are still many ideas for implementation that are being prepared for scientific inventions that will be a global revolution in the world of manufacturing and energy solutions.

Bilal Şen is currently working in the additive manufacturing industry and studying mechanical engineering at Balıkesir University.