Dr. Per A. Löthman obtained his Ph.D. degree from Twente University , The Netherlands in the field of Macroscopic Magnetic Self-assembly and conducted research in Canada, France and Germany on carbon nanotubes, Graphen and related nanomaterials. His research is interdisciplinary and involve BioNanotechnology including DNA, S-layers, Viruses (archaea, bacteriophages), Biomolecular Architecture. Botany and functional surfaces. Dr. Löthman has published over 60 scientifical articles, several book chapters and serves as a reviewer for several journals such as Journal of Bioanalytical and Analytical Chemistry, Journal of Colloid and Interface Science, Thin Solid Films, Sensors and Actuators, Microsystems Technologies, Biophysical Reviews and Letters, He is Senior Research Scientist at Foviatech GmbH in Hamburg, Germany, a young innovative high-tech company in the field of advanced materials and artificial intelligence, and a lecturer in Nanomedicine, Nanopharmacy and Nanomaterials (Kaiserslautern University) and Mechatronics Systems and Design (Hamburg University), Germany.

A.V.Dvurechenskii has completed in his Doctor of Science degree in physics from Rzhanov Institute of Semiconductor Physics (1988), Russian Academy of Science. From 2002 to 2018 he was the Vice-Director of this Institute and currently he is the Head of the Lab. of Nonequilibrium Semiconductor’s Systems, Professor of Novosibirsk State University, and Corresponding member of Russian Academy of Science. His research interests include point defects, phase transformations at ion implantation and laser annealing, molecular beam epitaxy of Si based nanoheterostructures and its electronic, optical and spins phenomena. As a guest scientist he worked at New York State University in Albany (1979), at Research Center Rossendorf, Dresden, Germany (1980 – 2006) and at Fudan University in Shanghai, China (2001, 2002, and 2006). He has published more than 400 peer-reviewed papers in reputed journals and has been serving as an expert board member of repute.

Osman Adiguzel graduated from Department of Physics, Ankara University, Turkey in 1974 and received PhD- degree from Dicle University, Diyarbakir-Turkey. He studied at Surrey University, Guildford, UK, as a post doctoral research scientist in 1986-1987, and his studies focused on shape memory alloys. He worked as research assistant, 1975-80, at Dicle University and shifted to Firat University in 1980. He became professor in 1996, and he has been retired due to the age limit of 67; following academic life of 45 years. He published over 60 papers in international and national journals. Adiguzel served his directorate of Graduate School of Natural and Applied Sciences, Firat University in 1999-2004. He supervised 5 PhD- theses and 3 M.Sc theses. He received a certificate which is being awarded to him and his experimental group in recognition of significant contribution of 2 patterns to the Powder Diffraction File – Release 2000. The ICDD (International Centre for Diffraction Data) also appreciates cooperation of his group and interest in Powder Diffraction File. Scientific fields of Adiguzel are as follow: Shape memory effect and displacive phase transformations in shape memory alloys and other alloys, molecular dynamics simulations, alloy modeling, electron microscopy, electron diffraction, x-ray diffraction and crystallography.

Dariusz Jacek Jakóbczak was born in Koszalin, Poland, on December 30, 1965. He graduated in mathematics (numerical methods and programming) from the University of Gdansk, Poland in 1990. He received the Ph.D. degree in 2007 in computer science from the Polish – Japanese Institute of Information Technology, Warsaw, Poland. From 1991 to 1994 he was a civilian programmer in the High Military School in Koszalin. He was a teacher of mathematics and computer science in the Private Economic School in Koszalin from 1995 to 1999. Since March 1998 he has worked in the Department of Electronics and Computer Science, Koszalin University of Technology, Poland and since October 2007 he has been an Assistant Professor in the Chair of Computer Science and Management in this department. His research interests connect mathematics with computer science and include computer vision, artificial intelligence, shape representation, curve interpolation, contour reconstruction and geometric modeling, numerical methods, probabilistic methods, game theory, operational research and discrete mathematics.

Anatoliy Zavdoveev, Ph.D. has been worked in Donetsk Institute of Physics and Technology of the National Academy of Sciences of Ukraine since 2003. From October 2005 to October 2008, he studied at the graduate school of the Donetsk Physics and Technology Institute of the National Academy of Sciences of Ukraine. In 2007 A.V. Zavdoveev was awarded Academician A.A. Galkin scholarship. From November 2008 to November 2014, he worked in the department of high-pressure physics and advanced technologies of the Donetsk Physics and Technology Institute of the National Academy of Sciences of Ukraine. Since November 2014 A.V. Zavdoveev works on Researcher position of the department of alloy steels welding, Paton Electric Welding Institute of the NAS of Ukraine. A.V. Zavdoveev defended his thesis for the positions degree of candidate of technical sciences in 2014. The scientific interests of A. V. Zavdoveyev concern the structural, physical, and operational characteristics of low-carbon steel subjected to various thermal-deformation processing methods. A.V. Zavdoveev successfully works with such techniques as backscattered electron diffraction (EBSD), scanning electron microscopy, X-ray diffraction, fractography, etc. His work shows the effectiveness of rolling with shear on the structure and properties of low carbon steel. In particular, the use of rolling with shear allows creating a special structure, which is inherited during further processing by traditional methods. He has 1 monograph, more than 15 articles in international journals and over 20 abstracts of conferences, actively participates in international conferences, Institute activities, and student training.

Anders Winkler worked in the German automotive industry for 15 years, during which he also spent 10 years conducting research in the fields of experimental mechanics and process-induced material properties. His research led him to achieve the degree of Dr.-Ing, from Chemniz University of Technology in Germany. He later joined Dassault Systemes to work on fatigue algorithms for polymer materials, and is now Director of Manufacturing & Materials Initiatives. He has also served as the secretary in CIMAC WG4 for 7 years, and represents Dassault Systemes in the NAFEMS metal manufacturing working group.

Prof. Chintakindi Sanjay, is a certified Corporate Director of World Council for Corporate Governance, UK and visited South and South East Asian Countries for research and presenting papers in International Conferences. At present working as a Full Professor in Industrial Engineering department, King Saud university, KSA. He has more than 28 years of experience and worked as a faculty of Manufacturing Engineering and Management Department at Government University in Malaysia. He was a Keynote Speaker for 55 International and National Conference and Chair & Co-Chair for 15 International Conferences held in Asia and a Member of Advisory and Technical Committee for more than 45 International Conferences across the world. He is a Member, Editorial Board/ Reviewer for more than 14 international journals and evaluated 27 Doctoral theses in Mechanical, Manufacturing, Materials and Management. He has successfully completed 5 research projects at International level and authored more than 54 Research Papers in Peer Reviewed, Indexed Journals and Conference Proceedings.

Ganesh Ji Omar is a Physicist and Material scientist with over 5 years of experience engaged with oxide electronic and magnetic devices. He has been working with pulsed laser deposition systems extensively and characterization in various testing equipment to investigate material’s multifunctionalities. He has been designing and developing spintronics devices with the motivation to solve the pressing problem of high energy consumption in CMOS technology. He has completed his Ph.D. doctorate research degree in the Department of Physics from the National University of Singapore with NUS Research Fellowship. His Ph.D. work aims to explore oxide interfaces or heterostructures that can exhibit a strong spin-orbit effect and triggers fascinating quantum phenomenon. He has completed his bachelor's and master's degrees from the Indian Institute of Science Education and Research (IISER), Bhopal with INSPIRE Fellowship. He has also worked as visiting researcher for short time in various universities such as (i) École Polytechnique de Montréal, Canada, (ii) Institut d’Etudes Scientifiques de Cargèse, France, (iii) Indian Institute of Technology, Madras. He has received several academic awards, including the Ph.D. best thesis Gold Medal (2021), Best Graduate Researcher Award (2020), IEEE Gold Medalist in magnetic symposium (2020) and Global Young Scientist Award (2020). He is Mitacs Globalink Fellow. He has cleared and qualified various competitive exams namely, IIT-JEE, CSIR JRF, JEST and GATE.