Dr. Mohammad Arif Kamal did his Bachelor of Architecture (B. Arch.) with Honors from Aligarh Muslim University, Aligarh, India in 2000, and secured Master of Architecture (M. Arch.) on a MHRD GATE Fellowship from Indian Institute of Technology (IIT), Roorkee, in 2002 and Ph.D. in ‘Energy Responsiveness in Traditional Residential Buildings of Lucknow’ on MHRD Fellowship, from IIT, Roorkee in 2007. His major fields of interest are Environmental Design, Sustainable Architecture, Energy Efficiency in Buildings, Climate Responsive Architecture, Traditional Architecture, Islamic Architecture etc. Dr. Kamal is presently working as an Associate Professor at Aligarh Muslim University, Aligarh. He is Editorial Board Member of many International Journals and Conference related to the Field of Architecture and Construction Engineering. He is life time member of Council of Architecture, India and Associate member of Indian Institute of Architects, India. He is also panel member of many International Research Organizations and Professional Bodies.

Prof. Wei Min Huang is currently an Associate Professor (tenured) at the School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore. With over 20 years of experience on various shape memory materials (alloy, polymer, composite and hybrid), he has published over 190 papers in journals, such as Accounts of Chemical Research, Advanced Drug Delivery Reviews, and Materials Today, and has been invited to review manuscripts from over 280 international journals (including Progress in Polymer Science, Nature Communications, Advanced Materials, and Advanced Functional Materials, etc), project proposals from American Chemical Society, Hong Kong Research Grants Council, etc, and book proposals from Springer, Elsevier and CRC. He has published two books (Thin film shape memory alloys – fundamentals and device applications, Polyurethane shape memory polymers) and is currently on the editorial board of over three dozen of journals.

Prof. Dr. Kerim Çetinkaya completed his undergraduate, graduate and doctorate education at Gazi University, he received training on flexible design and production at Huddersfield University, England in 1994. He completed his doctorate in 1995 and became associate professor in 1997 and professor in 2005. He was currently worked as a professor at the Department of Industrial Design Engineering at the Faculty of Technology, Karabük University for 20 years. In the electronic production laboratory was worked as a visiting professor at Medway campus of Greenwich university in 2013. He taught at Erasmus exchange and visit at Wolverhampton Universities in the UK and Koszalin University in Poland. Academic studies are on design and manufacturing, transport systems design, professional design applications, machine tools and bonding apparatus design, sheet metal mold design, CNC systems design, 3D printer design and applications, industry 4.0 and technology. He organised 1 st International Design Engineering symposium and four 3D printing and digital industry congress at the international level. He is chef editör on International Journal of 3D Printing Technologies and Digital Industry. He continues his work on product design, 3D printing FDM systems and industry 4.0 expansion. He carries out the EU project on 3D printing Technologies. He has 10 articles published in Sci journals, 28 articles in other Refereed Journals, 54 papers published in Scientific Meetings, printed books, lecture notes. Professor Kerim Çetinkaya, who worked in the Ostim Technical University Mechanical Program in 2019 and in the Industrial Product Design Department of Ostim Technical University in 2020, is still working as a professor in the Department of Interior Architecture and Environmental Design at Antalya AKEV University, Faculty of Art and Design.

Prof. Soshu Kirihara is a doctor of engineering and a professor of Joining and Welding Research Institute (JWRI), Osaka University, Japan. In his main investigation “Materials Tectonics” for environmental improvements of “Geotechnology”, multi-dimensional structures were successfully fabricated to modulate energy and materials flows effectively. Ceramic and metal components were fabricated directly by smart additive manufacturing, design and evaluation (Smart MADE) using high power ultraviolet laser lithography. Original stereolithography systems were developed, and new start-up company “SK-Fine” was established through academic-industrial collaboration.

Dr. Osman Adiguzel graduated from Department of Physics, Ankara University, Turkey in 1974 and received PhD- degree from Dicle University, Diyarbakir-Turkey. He studied at Surrey University, Guildford, UK, as a post doctoral research scientist in 1986-1987, and his studies focused on shape memory alloys. He worked as research assistant, 1975-80, at Dicle University and shifted to Firat University in 1980. He became professor in 1996, and he has been retired due to the age limit of 67, following academic life of 45 years. He published over 80 papers in international and national journals; He joined over 120 conferences and symposia in international and national level as Plenary Speaker, Keynote Speaker, Invited speaker, speaker or Poster presenter. He served the program chair or conference chair/co-chair in some of these activities. In particular, he joined in last six years (2014 - 2019) over 60 conferences as Speaker, Keynote Speaker and Conference Co-Chair organized by different companies in different countries. Additionally, he retired at the end of November 2019, and contributed with Keynote/Plenary Speeches over 60 Virtual/Webinar Conferences, due to the coronavirus outbreak in two year of his retirement, 2020 and 2021. Dr. Adiguzel served his directorate of Graduate School of Natural and Applied Sciences, Firat University in 1999-2004. He supervised 5 PhD- theses and 3 M. Sc theses. He is also Technical committee member of many conferences. He received a certificate which is being awarded to him and his experimental group in recognition of significant contribution of 2 patterns to the Powder Diffraction File – Release 2000. The ICDD (International Centre for Diffraction Data) also appreciates cooperation of his group and interest in Powder Diffraction File. Scientific fields of Dr. Adiguzel: Shape memory effect and displacive phase transformations in shape memory alloys and other alloys, molecular dynamics simulations, alloy modeling, electron microscopy, electron diffraction, x-ray diffraction and crystallography.

Dr. Zhou is an associate professor in the School of Mechanical and Aerospace Engineering at Nanyang Technological University, Singapore. His research interests include modelling and design of materials for sustainable materials, development of novel computational methods for modelling material behaviours, and additive manufacturing/3D printing. He conducted research as a postdoctoral fellow in the Department of Mechanical Engineering at Northwestern University, USA from 2007 to 2010. He was a visiting scholar in the School of Engineering and Applied Sciences at Harvard University, USA in the summer of 2013. He has published over 350 papers, and he is currently serves as Editor-in-Chief of Smart Manufacturing and Co-Editor-in-Chief of Journal of Micromechanics and Molecular Physics. Research Interest: Mechanics of materials; Modelling and design for sustainable materials; Additive manufacturing

Asst Prof. Ng Bing Feng is Assistant Professor with the School of Mechanical and Aerospace Engineering at Nanyang Technological University. He received his PhD from Imperial College London, United Kingdom and BEng(Hons) from Nanyang Technological University, Singapore. Research Interests Aero (Fluids and Structures), Energy (Passive Radiative Cooling, Building and Wind Energy Systems), Environment (Aerosols and Particulate Matter Conditioning) Please refer to research group website through link above or https://blogs.ntu.edu.sg/ngbf/ for latest updates