Thomas J. Webster’s (H index: 124; Google Scholar) degrees are in chemical engineering from the University of Pittsburgh (B.S., 1995; USA) and in biomedical engineering from RPI (Ph.D., 2000; USA). He has served as a professor at Purdue (2000-2005), Brown (2005-2012), and Northeastern (2012-2021; serving as Chemical Engineering Department Chair from 2012 - 2019) Universities and has formed over a dozen companies who have numerous FDA approved medical products currently improving human health in over 20,000 patients. His technology is also being used in commercial products to improve sustainability and renewable energy. He is currently helping those companies and serves as a professor at Brown University, Saveetha University, Vellore Institute of Technology, UFPI, and others. Dr. Webster has numerous awards including: 2020, World Top 2% Scientist by Citations (PLOS); 2020, SCOPUS Highly Cited Research (Top 1% Materials Science and Mixed Fields); 2021, Clarivate Top 0.1% Most Influential Researchers (Pharmacology and Toxicology); 2022, Best Materials Science Scientist by Citations (Research.com); and is a fellow of over 8 societies. Prof. Webster is a former President of the U.S. Society For Biomaterials and has over 1,350 publications to his credit with over 55,000 citations. He was recently nominated for the Nobel Prize in Chemistry.

4D Printing: The Future of 3D Printing for Medicine

Andrew studied Art and Design at Wolverhampton University, worked as a traditional model maker and in 1993 started his AM career at Liverpool University. He became 3D Systems senior Applications Engineer, introducing AM to various industries globally. Since 2007, he’s run his own businesses, and has participated in several global events. Andrew’s AM global contribution was rewarded in 2016 with an exclusive AMUG DINO Award. He was the European and then Global Ambassador for AMUG before becoming AMUG Vice President from 2019 to 2021. He sits on the AMUK Steering Board, is a member of the Woman in 3D Printing Advisory Board, sits on the TCT Expert Advisory Board and is a Create Education Ambassador. He continues to push the boundaries of AM.

3D Printing Applications that may help you start to “Think outside the cube"

Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, including the L’ORÉAL-UNESCO Italy for Women and Science 2011.

Multifunctional graded scaffolds by fused deposition modeling for the cranio-maxillofacial sector

Dr. Andreas Vlahinos is the CTO of Advanced Engineering Solutions. Andreas has concentrated on DfAM, Computer Aided Innovation, Generative Design, Lattice Structures, and Simple Solutions to Complex Problems. He has been instrumental in rapid product development through the implementation of Computer Aided Engineering for several Government agencies such as NASA, NREL, SANDIA, DOE, NCDMM, and US Army Aviation & Missile Command and several industry partners such as SpaceX, Lockheed Martin, General Dynamics, United Launch Alliance, Rafael Defense Systems, NAVISTAR Defense, etc. He has been a Professor of structural engineering at the University of Colorado. Several times he received the Professor of the Year Award. He has received the R&D 100 award and several patents. He received his Ph.D. in Engineering Science and Mechanics from the Georgia Institute of Technology. Finally, he is regularly invited as a keynote speaker and panelist on a variety of subjects (Generative Design, Innovation, DfAM, IoT) at international conferences.

Conquering the Challenges in Simulating Lattice Structures

Brandon Lucke-Wold was born and raised in Colorado Springs, CO. He graduated magna cum laude with a BS in Neuroscience and distinction in honors from Baylor University. He completed his MD/PhD, Master’s in Clinical and Translational Research, and the Global Health Track at West Virginia University School of Medicine. His research focus was on traumatic brain injury, neurosurgical simulation, and stroke. At West Virginia University, he also served as a health coach for the Diabetes Prevention and Management program in Morgantown and Charleston, WV, which significantly improved health outcomes for participants. In addition to his research and public health projects, he is a co-founder of the biotechnology company SwiftScience, the pharmaceutical company ProPhos Neuroscience, and was a science advocate on Capitol Hill through the Washington Fellow’s program. He has also served as president of the WVU chapters for the American Association of Pharmaceutical Scientists, Neurosurgery Interest group, and Erlenmeyer Initiative Entrepreneur group. In addition, he has served as vice president for the graduate student neuroscience interest group, Nu Rho Psi Honor Society, and medical students for global health. He was an active member of the Gold Humanism Honor Society and Alpha Omega Alpha Honor Society. He is currently Vice President of the UF House Staff Council, Chair of the Quality Improvement Committee, on the Board of Directors for the Alachua County Medical Society, and active member of Institutional Review Committee and Accreditation Requirements Review Committee. He is married to Noelle Lucke-Wold and has two children. As a family, they enjoy running with their dogs, rock climbing, and traveling. In his spare time, Brandon frequently runs half marathons and 10ks together with is wife. Brandon also enjoys reading, playing piano, discussing philosophy, and playing chess. He is currently a Pgy6 neurosurgery resident at University of Florida with pursuing endovascular enfolded training and was awarded the Dempsey Cerebrovascular Research Fellowship, SNS Fellowship, Van Wagenen Fellowship, R25 Grant, and SNIS Fellowship.

Effects of pre-injury oral anticoagulants use in elderly patients with mild traumatic brain injury: A systematic review and meta-analysis 

Rajesh Mrithyunjayan is the “ Vice President 3D Products & Solutions" for Monotech Systems Ltd. based out of Chennai . Core Responsibility : Building and Managing the 3D Division of Monotech, which consists of 1) 3D Monotech - Involved in sales and service of 3D Printers & 3D Scanners sales 2) Metamorph 3D - Involved in Providing 3D Printed Parts, 3D Scanning, Reverse Engineering and 3D Design for Govt/Public/Private industries and Research Institutions 3) Metaform 3D - Involved in 3D Printer and 3D Scanner R&D and manufacturing of Make in India Equipments. • Total of 25 years experience in Industrial equipment and Capital Equipment sales. • Total of 12+ Years + experience in 3D Printer Sales. • Total of 8+ years Experience in Business Development of 3D Printing Solutions. Key Highlights in 3D Printing Business :- 1. 3D Printing Business : 12 years of Exposure in global 3d printing technologies. 2. OEM’s : Developed and maintained strong Business ties for Monotech with Leading 3d printer brands like 3D Systems , Bigrep, Markforged, W2P , Procusini , 3devo , Thor, Meltio, Rangevision, XJet 3. Global Experience : Traveled to various expos & OEM facilities in Europe ( Germany , Italy , Austria, Spain ), US , Asia , China etc .. And developed a good understanding of various 3d printing technologies through interaction with manufacturers. Attended OEM workshops and training sessions w.r.t applications and ‘Go to Market’ strategy. 4. Application Experience : Carried out Research in Casting Industries w.r.t 3D Printing suitability. Successfully sold Wax 3d printers in Investment casting industries. Replaced Traditional patterns with 3d printed patterns in the large OEMS and sand-casting industry. 5. Technical Knowledge : Have exposure to all 3d printing technologies in plastic, Wax and metal applications. Have OEM training on 3d printing technologies and applications. : Have been invited and participated in symposiums and Events pan india organised by various IIT’s and other recognised universities and presented about Additive Manfacturing with Polymers, wax, metals and ceramics. 6. R&D - Setup in-house R&D facility within 3D Monotech and have developed commercial 3D Photogrammetry system and Metaform 3D Printer which is used for inhouse and research purposes with large build platform size. - Working on Composite Materials for 3D Printing for End use parts in polymers to replace metals in manufacturing techniques - Working on Ceramic 3d printing for dental and medical implant applications.

2D Materials: Unlocking the Potential for Additive manufacturing

Dr. Murali Mohan Cheepu is a research manager at STARWELDS Inc. He has over ten years of experience in the manufacturing and research industries. His research focuses on welding and joining, additive manufacturing, automation, digitalization and artificial intelligence. In addition, he is doing research on a novel Super-TIG welding process to increase productivity. Cheepu has won a number of awards, such as best researcher award from KWJS, trusted reviewer from the Institute of Physics in the UK, and outstanding young manufacturing engineer award from the SME, USA. He serves on the editorial board, reviewer, conference chair and technical committee member. Cheepu has written several peer-reviewed articles, welding research supplement articles in the American Welding Society and patents. Cheepu has a master's degree in welding engineering from the NIT Tiruchirappalli and a doctorate in mechatronics engineering from Kyungsung University.

Grain Refinement Techniques in Wire Arc Additive Manufacturing for Large Deposits

Dr. Bindhu is currently working as a Professor & Head, Department of Physics, Dean, Faculty of Science and Humanities and Director, Students Affairs and Overall Academic Coordinator at Noorul Islam Centre for Higher Education, India. EDUCATIONAL QUALIFICATION: M.Sc., M.Phil., Ph.D. RESPONSIBILITIES UNDERTAKEN: Member of Academic Council, Chairman, Board of Studies in Physics, NICHE, Chairperson of Disciplinary Committee, NICHE, Chairman of Doctoral Committee, Chief Examiner for UG & PG valuation, Member of first year BE/B.Tech. Curriculum committee, Member of Doctoral Committee, Member, Committee of subject experts and Established MOU with several industries. Bindu has PROFESSIONAL EXPERIENCE: 18 years. RESEARCH ACHIEVEMENTS: Guided Seven Ph.D scholars, Presently guiding 8 Ph.D scholars, Guided 14 M.Phil. scholars, Guided M.Sc. students for their projects, External DC member (MS University and Anna University). AREAS OF INTEREST: Materials science, Nanoscience & Technology, Engineering of layered and two dimensional materials and Polymer blends and composites. Total Publications : 50 https://scholar.google.com/citations?user=F_vCs84AAAAJ&hl=en CONFERENCES / SEMINARS / WORKSHOPS ORGANIZED: ▪ National Conference on Physics of New Materials- 20, 21st April 2012 ▪ Two week ISTE-STTP programme on Engineering Physics conducted by IIT Mumbai, Dec 2015 ▪ One day seminar on Advances in Physics, Feb2015 ▪ International Conference on Integration of STEM education and Mental health, collaboration with George Mason University, USA, 20-14 June 2016 ▪ One day seminar on Recent trends in Physics-2017, 10th March 2017 ▪ Program on Women Empowerment in collaboration with Chinmaya Mission, 18th September 2018 ▪ One-Day Basic Training Programme on Human Rights sponsored by NHRC, 29th October 2018 ▪ International Conference On Emerging Trends In Mathematical, Physical And Chemical Sciences (ETMPC 2019), 22nd February 2019 ▪ Lé-Spectra-Rendezvous of Brilliance, a Technical Event, 12th April 2019. ▪ Workshop on Emotional Intelligence , 12th February 2020 ▪ National Conference on Functional Materials (NCFM-2020) on 24th February 2020 ▪ Science Day Celebration, 6th March 2020 ▪ Webinar on “Gender Bias and Setero-typing, Gender Equality and Women’s Right” , 4th July 2020 ▪ Workshop on Entrepreneurship, Innovation and Women Empowerment Organised by Institution’s Innovation Council & Internal Complaints Committee on 28.10.2021 ▪ CSIR sponsored National Conference on Materials Science and Green Technology -9th & 10th March 2023 BOOKS AUTHORED : 5 Books on Engineering Physics HONOURS/AWARDS RECEIVED: ▪ Certificate of Excellence from IIT Bombay, 2015 ▪ Outstanding Staff Achiever Award conferred by Noorul Islam Centre for Higher Education on 4th Remembrance Day of Bharat Ratna Dr. A. P. J. Abdul Kalam on 27th July, 2019 ▪ Elsevier reviewer recognition award, 2016 ▪ Received “S” Grade for CSIR-SRTP activities held during June-August 2020 ▪ External BOS member at PSN College of Engineering and Technology, Tirunelveli ▪ External Doctoral Committee Member for MS University and Anna University

2D Materials: Unlocking the Potential for Additive manufacturing

Kheireddin Kadri has completed his Phd at the Laboratory of Processes and Engineering in Mechanics and Materials (Paris, France) at HESAM University at Paris, France. He has been working as a post-doctoral at De Vinci Research Center Paris, performing his research in the Modeling group laboratory since 2021. His team work research is focusing on multi-scale modelling of composite materials, by applying a new approach based on machine learning and artificial intelligence. He has been serving as jury for the title of Developer in Artificial Intelligence at the French network of digital factories SIMPLON.

Study of composite polymer degradation by finite element modelling and deep learning approach

Janne Heilala has a solid educational foundation, having, on the one hand, earned a Master of Science in Technology with a distinction in Lifecycle Management in 2019 and, on the other hand, with a supportive Master of Arts 2021 in the University of Tampere, Finland. In 2023, he directed his medical equipment research towards additive manufacturing product simulations in aerospace. With a subdued dedication, he initiated his doctoral studies starting in 2021 at the University of Turku, Finland, targeting the advancement of the manufacturing industry.

Advanced Manufacturing of Cube Sats in the Metaverse Product Development Lifecycle

Rajkumar Velu, PhD, is an Assistant Professor at the Indian Institute of Technology, Jammu. Currently, visiting research associate and priory worked as a Research Fellow at the Centre for Laser Aided Intelligent Manufacturing (CLAIM), University of Michigan, USA, and also as a Post-Doctoral Research Fellow at the Digital Manufacturing and Design Centre (DManD), Singapore University of Technology and Design, Singapore. He completed his PhD thesis in selective laser sintering of specific biopolymer composites for biomedical application at the Auckland University of Technology, New Zealand. Dr Velu engaged in research on additive processing since 2012, its emergence as a new technology, and focused on developing the materials and experimental infrastructure for conducting fundamental and applied research in this domain. Infrastructure developments include in-house test beds constructed for research. The focus has been on actual work leading to the invention of new material alternatives, process planning and enhancements, and modeling

Additive Manufacturing of functionally graded materials

Dr. Aissa Ouballouch received his Engineer degree and Doctorate in Mechanical Engineering at the University of Moulay Ismail (at High national school of arts and crafts) in 2013 and 2021, respectively. Subsequently, he joined the Mechanical Engineering Department at the High school of technology, within the University of hassan II Casablanca as an Assistant Professor. Over the years, Dr. Aissa Ouballouch has developed and taught a wide range of Mechanical Engineering courses such as Introduction to Mechanical calculation, technical drawing, mechanical design, CAD, CAM, FEA, structures calculation, project management, manufacturing processes, design office projects, introduction to programming of CNC machines, additive manufacturing,...On the other hand, he spent many years in various design offices from different sections namely automotive, aircraft, and mechanical & steel construction. Dr. Ouballouch's doctoral research consisted of characterizing, modeling and designing 3D printed parts obtained by additive manufacturing technologies, in particular fused deposition modeling technique. Presently, Dr. Ouballouch's primary research interest lies in the field of design and simulation of 3D printed components. Furthermore, Dr. Ouballouch’s research focuses on customizing and developing distinct and advanced techniques used for design and simulation of mechanical parts and systems to leverage the potential and capabilities of additive manufacturing.

Design considerations and strategies for FDM additive manufacturing technology

Nic is currently a designer with Advanced Engineering Solutions focusing on generating parametric solid models of complex geometries with beam, 2 ½ D, TPMS, and custom lattice structures. Nic has a B.S. from Florida State University and Certificate in “Design for Additive Manufacturing within the Creo Parametric environment”.

Optimizing the Design of Lattice Structures for Drone Wings

Amy Alexander is Unit Head of Mechanical Development and Applied Computational Engineering within the Division of Engineering at Mayo Clinic. In this role, she helps to bridge engineering capabilities with the clinical practice and supports a team of designers and engineers. She is past-chair of the Society of Manufacturing Engineers’ Healthcare Additive Manufacturing Advisory Board, a member of the Radiological Society of North America’s 3D Printing Special Interest Group, and frequent co-author and reviewer of medical 3D printing papers. She holds a B.S. in Biomedical Engineering, an M.S. in Engineering Management, and multiple certifications in Additive Manufacturing.

The Mayo Clinic Engineering Perspective: 3D Printing of Medical Device Prototypes for Benchtop Testing at the Point-of-Care

Ikechukwu Okoli a visionary co-founder of an Additive Manufacturing startup with a distinctive background in economics. He is specialized in economic development and technology adoption. His academic journey has equipped him with a deep understanding of economic systems, market dynamics, and the potential impact of technological advancements on emerging economies. He is commitment to bridging the technological gap in Africa by ensuring that the benefits of Additive Manufacturing are accessible to a broad spectrum of industries. Her startup aims to be a catalyst for economic empowerment, contributing to the realization of a technologically advanced and economically vibrant Africa.

Leap-frogging Manufacturing for Africa: Possible Business Models

Luis Martínez is the founder of the renowned startup Flamingo Biomechanichal Lab, dedicated to surgical planning using different additive manufacturing techniques. He also works as an R&D engineer at Cetemet. He specializes in biomechanics and the application of 4.0 technologies. His academic background and experience has endowed him with a very particular vision of how to implement different techniques in a wide variety of sectors, in addition to providing him with a great knowledge of manufacturing processes, the economic market and the impact of engineering evolution. His commitment is to achieve a more efficient global healthcare system, ensuring that biotechnology research leads to real results for society. His startup aims to be a nexus between multiple scientific branches to obtain great health and technological results.

The nexus of all sciences: What 3D Printing will bring us

Graduated in Mechanical Engineering (design curriculum) at the Niccolò Cusano University (Rome), he is currently a fellowship at Engineering Department of University Niccolò Cusano. His research interests are related to the development of biomaterials and technologies for cranio-maxillofacial applications, mainly additive manufacturing techniques. He is achieving a Ph.D. in Industrial Engineering-Materials Science and Technology and won the Best Poster Award in occasion of the International Conference Cells and Extracellular Templates (CTE) in 2023.

Development and Enhancement of Novel Biomedical Implants Utilizing Additive Manufacturing Techniques

Mutaz Aletein was born in Jordan. He received the B.E. degree in Mechanical engineering from the Hashemite University,jordan, in 2011, and the M.Sc. degree in Business Administration (MBA) from Al Al-Bayt University,, Jordan, in 2017. During his master thesis he was trying to determine the obstacles to the success of SMEs in Jordan that assist and develop small and medium enterprises sector in Jordan. He is researcher at Sunderland university , UK , postgraduate in Engineering Management. In 2012, he joined the Department of R&D, JODDB , as CAM Engineer, since 2017 until now, He is a Unit Head of Digital manufacturing and additive manufacturing , Head of Engineers Entrepreneurs Center RAM at (JEA) (2018 – PRESENT) and 3D Printing Consultant (2018- PRESENT) His current research interests include SMEs, Additive manufacturing (3D Printing), innovation,, management , Leadership and sustainability development. Eng.aletein • Member of association for project management Uk APM • Member of American Society for Testing and Materials ASTM • Member of American Society of Mechanical Engineers ASME • Board member Careers Of Gold • Member of youth advisory group at world bank (2019-present) • Head of Entrepreneurship Committee at (JEA) • Vice-Head of Creativity Committee at (JEA) (2018-present) • Founding member of Mafraq Youth Association (2015- present), • Secretary of the Hussein Cultural Forum (2013-2014) • Member of Jordanian Engineers Association (2011- present) Aletein is motivated, creative, analytical and professional manufacturing engineer, specialized in additive manufacturing technology with international certificates , proficient in ISO certification of processes for internal implementation of workflow. Enjoy solving complex problems, teaching others and demonstrating excellent oral and written communication skills. Alotein is a writer in many E-newspaper and active on social media and TV shows talking about the national and engineering issues.

Grain Refinement Techniques in Wire Arc Additive Manufacturing for Large Deposits

Jim Monroe, a Marine Corps Veteran, brings a wealth of experience to the Additive Manufacturing Industry. Working in "Expeditionary Additive Manufacturing," he collaborates with governments to deploy cutting-edge technologies in challenging military exercises, proving their frontline efficacy. Amid the Covid pandemic, Jim's participation on the America Makes Executive Committee and as Senior Director at American Additive Manufacturing ensured critical parts availability across sectors. As Vice President for SpaceFactory, he drives precision and dedication in navigating the Space and Terrestrial technology roadmap, spearheading innovation. With over a decade in the industry, Jim resides with his family in the greater Philadelphia region.

New Techniques, Technologies and Materials for Additive Manufacturing along with the proliferation of AM into mainstream manufacturing. The keys to driving successful adoption