Ed Macnab is Chief Executive Officer and one of the core group of founders of 3DPHC – 3D Printed Homes Corporation in Calgary, Canada. 3DPHC is a socially conscious start-up that truly places people ahead of profits. He has had a long career spanning the construction industry, the Canadian oilfield, telecom design and manufacture, finally retiring as an International IT Project Manager. Our VISION is to see every family living in a home that is affordable and meets their needs. Our MISSION is to reduce the cost of housing by using advanced technology and materials.
I, Jayshree Ramsook - Khiali - One of the Director of HEALTH SPOT LIFE THERAPY collaborated with Mr. SiphoThomas Magwasa who is currently licensed to establish a PRIVATE HOSPITAL TO INTRODUCE STEMCELL TREATMENTS IN HIS HOSPITAL. Started as a volunteer paramedic and thereafter had three and a half yearsof experience as a paramedic at the South African Provincial Ambulance Services, based at the R.K. KHANPROVINCIALHOSPITAL. Due to challenging rescue times, my work prompted me to pursue in stem cell research at length. Constantly following the news in America, the ban on embryonic stem cell research. However my researchstartedon 17 October 2005 were I had the opportunity to communicate with Dr. Direndra Rajaruthnuma cardiacthoracicsurgeon about my extensive research on stem cell infusions, however I was inspired by his moral support topursue stem cell treatments : My case 1. Rose Lee Usher, a leukemia patient urgently required Umbilical CordBloodStem Cell to save her life. Umbilical Cord Blood Stem Cells was flown from Boston , America. Case- 2. Mrs.RosheenMahabeer diagnosed with Sarcoidosis of the lung since 17 October 2016 . She had to live with an oxygentank24hours a day , urgently required stem cell infusion, however she received stem cell infusion at a privateclinic, livedfor four years. I had taken the initiative to apply for a Provincial Lottery - a Society Lottery to assist infundraisingforcancer treatment. Participated for the draft promulgation of THE SOCIETY LOTTERIES ACT 57 OF 1997.I haveaddressed these major concepts with HIGHNESS SHEIK HAMDANAND VARIOUS OTHER GOVERNMENT DEPARTMENTS IN THE UNITED ARAB EMIRATES.
In recent years, Rudolf von Stokar has successfully accompanied numerous companies through the critical start-up phase and market launch in German industry. Particular focus here has been on: Software-over-the-air, driver assistance systems, alternative drives, Car2X, navigation up to autonomous driving. Rudolf Stokar has an international and technically sound education. He lives in Munich as a single father with his two daughters.
Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, incuding the L’ORÉAL-UNESCO Italy for Women and Science 2011
Hi I am Tobias Teufel, I funded a small 3d-printing start-up in 2021, active in the B2C sector. After half a year I moved to the B2B sector as consultant for small and medium companies. In the summer of 2022, I started the first express print service for an automotive company that needed parts in less then 36 hours, while I was on a trip in Sweden. But we delivered and they felled relived that they themselves could keep their delivery date with Volvo. From there on to the end of the year the start-up grew and we improved our delivery speed and quality. Now we, my co-founder, an Investor and me, are in the process of incorporating out start-up with a location shared with one of our long time customers, who are also developing a 3d-printer.
Among the forefront of Industrial revolution 4.0 Suneel Kashyap is a fully accomplished, results driven and technically sophisticated, professional with over 20 years of multi-disciplinary experience in the UAE, UK & INDIA, focusing on Offering Solutions in Additive Manufacturing & 3D Printing in Polymers, Metal and Concrete. An academically qualified master’s degree holder in Rapid Product Development from the UK, Suneel Kashyap is an AM expert who is Passionate about developing long-term relations with the current and relevant industries. He has also successfully developed revenue generation programs with high business acumen for companies in line with the company's Vision, objectives along with excellent networking abilities, gathering business/market intelligence, technical background and consultative approach and has opened vital channels of business.
Door No.200, Immidhihalli Main Road, Whitefield-560066, Bangalore, India
Global Scientific Guild organizes conferences and webinars to promote quality research and real world impact in an atmosphere of true international co-operation between scientists, doctors, professors, practitioners, engineers and industry by bringing together the world class renowned personalities to discuss the latest developments and innovations at one common platform.