Conference Co-Chairperson

Ed Macnab is Chief Executive Officer and one of the core group of founders of 3DPHC – 3D Printed Homes Corporation in Calgary, Canada. 3DPHC is a socially conscious start-up that truly places people ahead of profits. He has had a long career spanning the construction industry, the Canadian oilfield, telecom design and manufacture, finally retiring as an International IT Project Manager. Our VISION is to see every family living in a home that is affordable and meets their needs. Our MISSION is to reduce the cost of housing by using advanced technology and materials.

I, Jayshree Ramsook - Khiali - One of the Director of HEALTH SPOT LIFE THERAPY collaborated with Mr. SiphoThomas Magwasa who is currently licensed to establish a PRIVATE HOSPITAL TO INTRODUCE STEMCELL TREATMENTS IN HIS HOSPITAL. Started as a volunteer paramedic and thereafter had three and a half yearsof experience as a paramedic at the South African Provincial Ambulance Services, based at the R.K. KHANPROVINCIALHOSPITAL. Due to challenging rescue times, my work prompted me to pursue in stem cell research at length. Constantly following the news in America, the ban on embryonic stem cell research. However my researchstartedon 17 October 2005 were I had the opportunity to communicate with Dr. Direndra Rajaruthnuma cardiacthoracicsurgeon about my extensive research on stem cell infusions, however I was inspired by his moral support topursue stem cell treatments : My case 1. Rose Lee Usher, a leukemia patient urgently required Umbilical CordBloodStem Cell to save her life. Umbilical Cord Blood Stem Cells was flown from Boston , America. Case- 2. Mrs.RosheenMahabeer diagnosed with Sarcoidosis of the lung since 17 October 2016 . She had to live with an oxygentank24hours a day , urgently required stem cell infusion, however she received stem cell infusion at a privateclinic, livedfor four years. I had taken the initiative to apply for a Provincial Lottery - a Society Lottery to assist infundraisingforcancer treatment. Participated for the draft promulgation of THE SOCIETY LOTTERIES ACT 57 OF 1997.I haveaddressed these major concepts with HIGHNESS SHEIK HAMDANAND VARIOUS OTHER GOVERNMENT DEPARTMENTS IN THE UNITED ARAB EMIRATES.

In recent years, Rudolf von Stokar has successfully accompanied numerous companies through the critical start-up phase and market launch in German industry. Particular focus here has been on: Software-over-the-air, driver assistance systems, alternative drives, Car2X, navigation up to autonomous driving. Rudolf Stokar has an international and technically sound education. He lives in Munich as a single father with his two daughters.

Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, incuding the L’ORÉAL-UNESCO Italy for Women and Science 2011

Hi I am Tobias Teufel, I funded a small 3d-printing start-up in 2021, active in the B2C sector. After half a year I moved to the B2B sector as consultant for small and medium companies. In the summer of 2022, I started the first express print service for an automotive company that needed parts in less then 36 hours, while I was on a trip in Sweden. But we delivered and they felled relived that they themselves could keep their delivery date with Volvo. From there on to the end of the year the start-up grew and we improved our delivery speed and quality. Now we, my co-founder, an Investor and me, are in the process of incorporating out start-up with a location shared with one of our long time customers, who are also developing a 3d-printer.

Among the forefront of Industrial revolution 4.0 Suneel Kashyap is a fully accomplished, results driven and technically sophisticated, professional with over 20 years of multi-disciplinary experience in the UAE, UK & INDIA, focusing on Offering Solutions in Additive Manufacturing & 3D Printing in Polymers, Metal and Concrete. An academically qualified master’s degree holder in Rapid Product Development from the UK, Suneel Kashyap is an AM expert who is Passionate about developing long-term relations with the current and relevant industries. He has also successfully developed revenue generation programs with high business acumen for companies in line with the company's Vision, objectives along with excellent networking abilities, gathering business/market intelligence, technical background and consultative approach and has opened vital channels of business.

With degree qualifications in Construction Management, Civil Engineering and an MBA, Paul has for over 2 decades worked on construction sites & consulting practices building businesses within the Civil and Construction Sectors. With a significant amount of that time within the Concrete Slipform Industry and working with Vehicle Restraint Systems. For the last 10 years his company, TBS has successfully licensed Concrete Barrier Systems, overseeing the Design Integration, Installation, Supplier/Installer Competency, Quality Management and Product Certification. With this knowledge, TBS has teamed up with Irish 3DCP leaders Hardcourt Technology & Design Partners to offer an ‘off the shelf ‘3DCP product portfolio underpinned by a tailored QMS & Certification Process. Under license, CUR3D Products are designer & contractor friendly, fully traceable & most importantly certifiable. If you buy a printer tomorrow, CUR3D has an 'off the shelf' certifiable product to let you print houses.

Frank St. Gelais spent his early years in a variety of service industries and has developed an incredibly strong sense of empathy for those who are less fortunate. He then studies graphic design in Calgary and has transferred that design skill to the Affordable Housing philosophy that is the bedrock of 3DPHC’s mandate.

Ed Macnab is Chief Executive Officer and one of the core group of founders of 3DPHC – 3D Printed Homes Corporation in Calgary, Canada. 3DPHC is a socially conscious start-up that truly places people ahead of profits. He has had a long career spanning the construction industry, the Canadian oilfield, telecom design and manufacture, finally retiring as an International IT Project Manager. Our VISION is to see every family living in a home that is affordable and meets their needs. Our MISSION is to reduce the cost of housing by using advanced technology and materials.

Dr. Andreas Vlahinos is the CTO of Advanced Engineering Solutions. Andreas has concentrated on DfAM, Computer Aided Innovation, Generative Design, Lattice Structures, and Simple Solutions to Complex Problems. He has been instrumental in rapid product development through the implementation of Computer Aided Engineering for several Government agencies such as NASA, NREL, SANDIA, DOE, NCDMM, and US Army Aviation & Missile Command and several industry partners such as SpaceX, Lockheed Martin, General Dynamics, United Launch Alliance, Rafael Defense Systems, NAVISTAR Defense, etc. He has been a Professor of structural engineering at the University of Colorado. Several times he received the Professor of the Year Award. He has received the R&D 100 award and several patents. He received his Ph.D. in Engineering Science and Mechanics from the Georgia Institute of Technology. Finally, he is regularly invited as a keynote speaker and panelist on a variety of subjects (Generative Design, Innovation, DfAM, IoT) at international conferences.

Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, incuding the L’ORÉAL-UNESCO Italy for Women and Science 2011

Dr. Per A. Löthman obtained his Ph.D. degree from Twente University , The Netherlands in the field of Magnetics and Self-assembly, conducted research in Canada, France and Germany on carbon nanotubes, Graphen and related 2D nanomaterials. His research is interdisciplinary and involve sensors and sensing, 2D advanced materials, BioNanotechnology including DNA, S-layers, Viruses (archaea, bacteriophages), Biomolecular Architecture, functional surfaces, microfabrication etc. Dr. Löthman has published over 90 scientific articles, several book chapters and serves as a reviewer and he is on the editorial board for several journals such as Nature, Nature Materials, Journal of Bioanalytical and Analytical Chemistry, Journal of Colloid and Interface Science, Thin Solid Films, Sensors and Actuators, Microsystems Technologies, Biophysical Reviews and Letters and International Јоurnal of Applied Mathematics and Theoretical Physics (IJAMTP). Dr. Löthman is CSO (Chief Scientifical Officer) at Foviatech GmbH in Hamburg, Germany, a young innovative high-tech company in the field of advanced materials and artificial intelligence, and a senior lecturer in “Nanomedicine, Nanopharmacy” and “Sensors and Sensing in Engineering, Biology and Medicine” (Kaiserslautern University) and Mechatronics Systems and Design (Hamburg University), Germany and Manufacturing Engineering (HTW Berlin) Germany.

I, Jayshree Ramsook - Khiali - One of the Director of HEALTH SPOT LIFE THERAPY collaborated with Mr. SiphoThomas Magwasa who is currently licensed to establish a PRIVATE HOSPITAL TO INTRODUCE STEMCELL TREATMENTS IN HIS HOSPITAL. Started as a volunteer paramedic and thereafter had three and a half yearsof experience as a paramedic at the South African Provincial Ambulance Services, based at the R.K. KHANPROVINCIALHOSPITAL. Due to challenging rescue times, my work prompted me to pursue in stem cell research at length. Constantly following the news in America, the ban on embryonic stem cell research. However my researchstartedon 17 October 2005 were I had the opportunity to communicate with Dr. Direndra Rajaruthnuma cardiacthoracicsurgeon about my extensive research on stem cell infusions, however I was inspired by his moral support topursue stem cell treatments : My case 1. Rose Lee Usher, a leukemia patient urgently required Umbilical CordBloodStem Cell to save her life. Umbilical Cord Blood Stem Cells was flown from Boston , America. Case- 2. Mrs.RosheenMahabeer diagnosed with Sarcoidosis of the lung since 17 October 2016 . She had to live with an oxygentank24hours a day , urgently required stem cell infusion, however she received stem cell infusion at a privateclinic, livedfor four years. I had taken the initiative to apply for a Provincial Lottery - a Society Lottery to assist infundraisingforcancer treatment. Participated for the draft promulgation of THE SOCIETY LOTTERIES ACT 57 OF 1997.I haveaddressed these major concepts with HIGHNESS SHEIK HAMDANAND VARIOUS OTHER GOVERNMENT DEPARTMENTS IN THE UNITED ARAB EMIRATES.

Luigi Monaco Born in Dar Es Salaam, Tanzania, Luigi Monaco is a globally-minded designer, inventor, and entrepreneur with a diverse cultural background. Having been raised in Saudi Arabia and Germany, he brings a unique perspective to his work. As a self-taught designer and engineer, Luigi has built a reputation for his ability to find simple and effective solutions to complex problems. He is the owner of two successful German GmbHs and holds several national and international patents. With a strong understanding of both hardware and software, as well as mechanical engineering, Luigi's expertise spans across multiple industries. He is known for fostering win-win-win relationships, always looking for ways to benefit all parties involved. His open-minded and collaborative approach has led to many successful projects and partnerships. In addition to his business acumen, Luigi is also fluent in English, German, Italian, and French

Henry Pinchbeck is a Founder and the CEO of 3D LifePrints. A scientist by training, he is an experienced businessman and a UK qualified solicitor. As CEO, Henry is responsible for all 3D LifePrints’ global activities but particularly concentrates on the development of the medical 3D printing sector in the UK and USA.

Soshu Kirihara is a doctor of engineering and a professor of Joining and Welding Research Institute (JWRI), Osaka University, Japan. In his main investigation “Materials Tectonics as Sustainable Geoengineering” for environmental modifications and resource circulations, multi-dimensional structures were successfully fabricated to modulate energy and materials flows effectively. Ceramic and metal components were fabricated directly by smart additive manufacturing, design and evaluation (Smart MADE) using high power ultraviolet laser lithography. Original stereolithography systems were developed, and new start-up company “SK-Fine” was established through academic-industrial collaboration.

CMO at COBOD International for the past 2 years. Senior marketing roles within globally leading building industry giants such as Schneider Electric, Rockwool and LIXIL/Grohe.

CEO of Epoch Wires, PhD (Cantab), MBA (Cranfield)

As an experienced Licensed Architect and Project Manager, I offer 20+ years of construction and professional architectural experience that includes concept-to-completion of an array of Single family Residential Homes, High-End/Mixed-Use, Corporate, Municipal, Commercial, Retail, Hospitality, Educational, and LEED, projects. In the past I’ve focused on integrated project delivery, Lean Construction, and educating clients and coworkers in the power of BIM. Currently, I am Lead Architect for Black Buffalo 3D corporation, where I Provide Cost and Material evaluations for potential projects, create conceptual 3DCP designs and develop construction details, as well as model, slice, and generate g-code for our prints

Nikolai Kulikov specialist of the Department of automatic installations of the Volgograd Polytechnic University, Russia. Owns its own production of auto parts for Renault, Nissan, BMW, Mercedes, Volkswagen, Citroen since 2019. He also owns an LLC in the USA.

Arnaud Roux is head of European sales department of 3DCeram Sinto. After obtaining a Master of International Business Management in France and a Bachelor of business administration in Scotland, Mr Roux worked forLegrand (Saudi Arabia) and Air Flow (France) before joining 3DCeram Sinto in 2016. In 19 years since its creation, 3D Ceram became a world leader in 3D ceramic printing selling 3D ceramic printers all over the world and having clients covering a broad range of applications (aerospatial, industry, biomedical, defense, electronic…).

Ty Canion is the founder and CEO of Canion3D Inc. a technology company focused on the Additive Manufacturing industry, which he founded in 2015. He is a 15 year veteran of the U.S. Air Force and has worked in various domains of technology across several industries. He has completed his Master’s Degree in Business Administration with concentration of Information Systems from the University of Arizona GC and his bachelors in Entrepreneurship Studies also from UAGC.

Neel Kamal Gupta is pursuing Ph.D. in the department of mechanical engineering at the Indian Institute of Technology Bombay (IIT Bombay) in metal-based 3D printing. During his Ph.D., he has filled two patents, presented four international conference papers, and published one journal paper with few in the pipeline. His expertise is in the wire-based additive manufacturing system and residual stress management for metallic components. He is a reviewer of a few reputed journals.