Dr. Andreas Vlahinos is the CTO of Advanced Engineering Solutions. Andreas has concentrated on DfAM, Computer Aided Innovation, Generative Design, Lattice Structures, and Simple Solutions to Complex Problems. He has been instrumental in rapid product development through the implementation of Computer Aided Engineering for several Government agencies such as NASA, NREL, SANDIA, DOE, NCDMM, and US Army Aviation & Missile Command and several industry partners such as SpaceX, Lockheed Martin, General Dynamics, United Launch Alliance, Rafael Defense Systems, NAVISTAR Defense, etc. He has been a Professor of structural engineering at the University of Colorado. Several times he received the Professor of the Year Award. He has received the R&D 100 award and several patents. He received his Ph.D. in Engineering Science and Mechanics from the Georgia Institute of Technology. Finally, he is regularly invited as a keynote speaker and panelist on a variety of subjects (Generative Design, Innovation, DfAM, IoT) at international conferences.

I, Jayshree Ramsook - Khiali - One of the Director of HEALTH SPOT LIFE THERAPY collaborated with Mr. SiphoThomas Magwasa who is currently licensed to establish a PRIVATE HOSPITAL TO INTRODUCE STEMCELL TREATMENTS IN HIS HOSPITAL. Started as a volunteer paramedic and thereafter had three and a half yearsof experience as a paramedic at the South African Provincial Ambulance Services, based at the R.K. KHANPROVINCIALHOSPITAL. Due to challenging rescue times, my work prompted me to pursue in stem cell research at length. Constantly following the news in America, the ban on embryonic stem cell research. However my researchstartedon 17 October 2005 were I had the opportunity to communicate with Dr. Direndra Rajaruthnuma cardiacthoracicsurgeon about my extensive research on stem cell infusions, however I was inspired by his moral support topursue stem cell treatments : My case 1. Rose Lee Usher, a leukemia patient urgently required Umbilical CordBloodStem Cell to save her life. Umbilical Cord Blood Stem Cells was flown from Boston , America. Case- 2. Mrs.RosheenMahabeer diagnosed with Sarcoidosis of the lung since 17 October 2016 . She had to live with an oxygentank24hours a day , urgently required stem cell infusion, however she received stem cell infusion at a privateclinic, livedfor four years. I had taken the initiative to apply for a Provincial Lottery - a Society Lottery to assist infundraisingforcancer treatment. Participated for the draft promulgation of THE SOCIETY LOTTERIES ACT 57 OF 1997.I haveaddressed these major concepts with HIGHNESS SHEIK HAMDANAND VARIOUS OTHER GOVERNMENT DEPARTMENTS IN THE UNITED ARAB EMIRATES.

Ilaria Cacciotti is Full Professor of Biomaterials & Tissue Engineering and Materials Science & Technology at University of Rome "Niccolò Cusano". She graduated in Medical Engineering at the University of Rome “Tor Vergata” (Master of Science Award ‘Fondazione Raeli’), completed the Ph.D in Materials Engineering (Ph.D Thesis Award ‘Marco Ramoni 2011, Ph.D Thesis AIMAT Award 2012) and obtained the II Level Master degrees in “Forensic Genetics” and in "Protection against CBRNe events". She is expert in the synthesis/processing/characterisation of biocompatible nanostructured materials, particularly for applications in the biomedical/environmental/agri-food sectors. She is member of the Editorial Board of several international journals, including Applied Science-MDPI, Applied Surface Science Advances-Elsevier, Frontiers in Biomaterials, Open Journal of Materials Science- Bentham Science. For her research activity, she received more than 20 awards, including the L’ORÉAL-UNESCO Italy for Women and Science 2011

Ioannis Ntintakis is Lecturer of the Mechanical Engineering Department, Faculty of Engineering, of the Hellenic Mediterranean University since January 2019. From September 2010 until January 2019 he was a member of the Wood and Furniture Design & Technology Department of Technological Education Institute of Thessaly on the position of Lecturer. Ioannis Ntintakis awarded the title of Industrial Design Engineer at Technological Education Institute of West Macedonia in 2001. He holds a master’s degree (MSc) in Advanced Manufacturing Systems from Kingston University (UK) in 2006. He is a Ph.D. candidate at the Technical University of Crete, School of Production Engineering and Management, his doctoral thesis is titled ‘Topology optimization for Additive Manufacturing’. He teaches in undergraduate and postgraduate studies in the Department of Mechanical Engineering and in the Department of Wood and Furniture Design & Technology. He is a co-author in two technical books, and he is an author of seventeen articles in journals with judges. From 2001 to 2010 he has professional experience in the R&D departments of several Greek industrial enterprises. His current main research interests are additive manufacturing, lightweight structures, topology optimization, homogenization, industrial design, and CAD / CAM.

The Design of Lightweight Structures for Additive Manufacturing

Chris Harris serves as the Vice President of Defense of the Americas for SPEE3D, specializing in expeditionary point-of-need technology for military readiness. Harris has authored six books, including The Complete Idiot’s Guide to Self-Defense, licensed by one of the largest publishers in the world. For 25 years as a private contractor, he taught his personal brand of elite close-quarters combat training to more than 500 government agencies and private-sector organizations worldwide. He is a Business Executives for National Security (BENS) member and a US military veteran. As the author of Phase Selling for Additive Manufacturing, Harris has provided his proprietary sales performance training and consulting services to more than 200 AM companies from 60 countries. He is also a contributor to ALL3DP Magazine, where nearly three million monthly readers have access to his content. Harris has been inducted into the Martial Arts Hall of Fame and holds the rank of Grand Master. He currently serves on the US Ju-Jitsu Technical Committee and the US Taiho Jutsu Instructors Committee. As a recognized authority on adversity, resilience, and mindset and the author of I Go Thru, he is a sought-after keynote speaker and media guest. As an award-winning inventor, Harris has been granted multiple patents, including the first nonlethal control and restraint police baton.

Dr. Farid Menaa, MD, PhD, PharmD, MBA, Specialist in Nanomedicine, Pharmacy, Genetics and Internal medicine (sub: Oncology, Hematology, Geriatry, and Dermatology). He Awarded with 4 Post-Doctoral Formations. He is also Hon. Professor of the Universities and Ex-Teacher in Genetics and Biochemistry at Universities of Paris. PI with projects in Genetics, Oncology, Hematology, Dernatology, Infectiology, Nanomedicine, Pharmaceutics, Chemistry, Biophysics, Geriatry, Stem Cells, Regenerative Medicine, Anti-Aging, Dentistry, Veterinary Medicine, Material Sciences and Environmental Sciences. Ex-Consulting Director at Fluorotronics, Inc-SDSU-UCSD affiliated, San Diego, CA, USA Entrepreneur. Hon. R&D&I Director at CIC. Ex-CSO and Vice-President at Fluorotronics, Inc. CA, USA. Ex-Engineer at the CEA, French Ministry of the Defence (Military Base). Co-Pioneer of the SpectroFluor (TM) Technology (C-F based Spectroscopy). Chief Editor of Journal in Dermatology. Reviewer and/or Editor for numerous high impact factor journals of Top Publishers (reviewed > 600 articles for the scientific and medical communities). He is the Speaker, chairman, organizer for > 300 events. He Directed over 50 scholars and Scientific referee for numerous MSc., PhD and Assistant and Associate Professors. International Consulting Healthcare Expert.

Dr. Murali Mohan Cheepu is a research manager at STARWELDS Inc. He has over ten years of experience in the manufacturing and research industries. His research focuses on welding and joining, additive manufacturing, automation, digitalization and artificial intelligence. In addition, he is doing research on a novel Super-TIG welding process to increase productivity. Cheepu has won a number of awards, such as best researcher award from KWJS, trusted reviewer from the Institute of Physics in the UK, and outstanding young manufacturing engineer award from the SME, USA. He serves on the editorial board, reviewer, conference chair and technical committee member. Cheepu has written several peer-reviewed articles, welding research supplement articles in the American Welding Society and patents. Cheepu has a master's degree in welding engineering from the NIT Tiruchirappalli and a doctorate in mechatronics engineering from Kyungsung University.

Soshu Kirihara is a doctor of engineering and a professor of Joining and Welding Research Institute (JWRI), Osaka University, Japan. In his main investigation “Materials Tectonics as Sustainable Geoengineering” for environmental modifications and resource circulations, multi-dimensional structures were successfully fabricated to modulate energy and materials flows effectively. Ceramic and metal components were fabricated directly by smart additive manufacturing, design and evaluation (Smart MADE) using high power ultraviolet laser lithography. Original stereolithography systems were developed, and new start-up company “SK-Fine” was established through academic-industrial collaboration.

Studied Mechanical Engineering at Karlsruhe Institute of Technology (KIT) >Focus on additive manufacturing of polymer materials continuous carbon fiber reinforced thermoplastic (CFRTP) > Patient specific implants for Cranio-Maxillo-Facial area via SLS > Thesis on “Simulation of PA6 process parameters for SLS” Career: o Network manager for “Additive Manufacturing Surface Manipulation” research network for SMEs in Germany o Now: Business Development and Sales at Notion Systems in Germany > Supplier of industrial inkjet printing systems for the manufacturing of electronic displays, printed circuit boards, semiconductor components, as well as high precision optical 3D parts.

Additive Manufacturing of Electronics: The Inkjet Way

Daniel Delfino, a skilled mechanical engineer specializing product development and manufacturing. With over 20 years of experience, he began his career in 1999 working on tooling design. Since then, he has gained valuable expertise in additive manufacturing technology, product development, and digital solutions such as AI, ML, computer vision, and IoT. As the founder of R&D Technologies, an engineering company dedicated to serving the energy market, Daniel is committed to delivering high-quality services and products that meet the industry's demands. Whether it's designing new equipment, improving existing technology, or developing cutting-edge digital solutions, Daniel and his team are passionate about solving complex challenges and driving innovation in the energy sector.

Direct Metal Laser Sintering - DMLS : Technology Review

Jaimin Zaveri obtained his graduation in Chemistry from Gujarat University, Ahmedabad. Then masters in Polymer Science from SP University, Gujarat. He has worked, starting from 1996 in Plastics Molding Firms and then from 2002 to 2016 worked for multinational raw material companies like INEOS ABS (INDIA) Ltd , Lanxess, Covestro( India) Pvt Ltd ( Formally Bayer Material Science Ltd, Bayer AG) & Covestro at Key Positions in marketing and technical Services. Success fully handled various engineering plastics like ABS, SAN, PC, PC/ABS, TPU, PA6, PA66, PBT, PETG. He has successfully contributed to create new applications in industry sectors like Automotive, Consumer Electronics, E&E, Constructions, Lighting, Mass transport, Textile from concept to commercialization of application. Wide exposure of Institutional sales and Industrial marketing, Specification of product at reputed OEMS and Institutes. He has created many national and international key visible special projects in different filed of plastics. He is now working with Gharda Chemicals Ltd as head of international marketing and application development for high temperature and super high performance materials like PEK, PEKK, PBI, PEI. Helping Gharda Chemicals for marketing and application development to expanding the market of super high performance polymers. He has been working on various application development and material developments/Technology development for Additive manufacturing novel high performance materials segment ( 3D printing) since last 6 years. Mr Jaimin Zaveri is management committee member of IPI .

Dr. Mounir FRIJA graduated in 2018 as a PhD-engineer in Mechanical Engineering from the National School of Engineers of Monastir. He is a member of the UGPMM Research Unit "Unit of Mechanical Engineering Production and Materials - UR17ES43" of the National School of Engineers of Sfax (ENIS) - Tunisia. He is also a member of the Tunisian Association of Mechanics ATM and the Tunisian welding association ATS. He works as an assistant Professor at the Higher Institute of Applied Sciences and Technology of Sousse – University of Sousse. He holds an administrative rank as the director of the career and skills certification center 4C ISSAT Sousse. He is a senior technical expert in Industry 4.0 with Novation 4.0 Center at the Novation city of Sousse. He is responsible for the INDUSTRY 4.0 training course at the virtual university of Tunis for the final Professional Master classes specialized in the Optimization and Modernization of Companies. Dr. FRIJA directed many events and conferences in advanced manufacturing technologies such as the international conference on innovative materials, manufacturing and advanced technologies: IMMAT'2019 & IMMAT'2022. He is a professionnal trainer and consultant across many industries. Auditor TUV IATF 16949v2016 & Lead Implementor ISO 9001v2015., he has started his new experience as a reviewer in the journal Materials Science & Engineering A (Elsevier) since 2020. In his PhD, Dr. FRIJA worked on the Prediction of the reliability of the polycyclic fatigue resistance of mechanical components treated by laser shock peening. He published 02 books, 07 research papers and about 10 communication papers in the field of finite elements, numerical simulation and optimizing the mechanical surface treatments processes like Laser shock Peening LSP and Controled shot peening CSP on aeronautical parts made of nickel and titanium superalloys. Since 2020, he started a new research theme with a motivated team of master's and PhD students in the biomechanics field. His research focuses on metal additive manufacturing of medical implants and prostheses. New research perspectives open up with a research project collaboration entitled Effectiveness of Laser Shock Peening in Post-processing Additive Manufactured metal components. It has been initiated between the University of Pretoria, Department of Materials Science and Metallurgical Engineering and the University of Sousse, Department of Mechanical Engineering. The project’s theme is the Investigation of the laser shock peening effect on the pore closure of 3d printed metal samples (experimental and numerical approach).

Mamoun Alshihabi is Graduate Research Assistant at Isparta university of applied sciences and Specialist in mass reduction and part reinforcement by Cad part optimization with lattice structures for additive manufacturing.